Re: Gearbox and clutch issues
May 31, 2021 at 8:07 PM
Hi
Do I understand that the clutch pedal just goes to the floor but the clutch is not operated? Assuming there is clearance on the master cylinder and slave cylinder pushrods when the pedal is released the only thing, other than a defective master cylinder, I can think of is the breather hole in the master cylinder cap is blocked. This could be easily ruled out by driving the car with the master cylinder cap off.
We would be grateful to hear what you find after getting these suggestions checked.
Good luck
PeteC
Re: Gearbox and clutch issues
June 2, 2021 at 2:16 PM
The garage have called they believe the problem may be down to the flexi hose which might not be man enough ,as all the other pipe work and slave and master cylinders have been replaced,they are looking for a braided pipe which should be stronger
Bonners
Re: Gearbox and clutch issues